Product Description
Standard: IEC60502; BS5467: 1997 with Amendment 1
Conductor:
Soft annealed stranded copper wires to BS6360, class 2, concentrically stranded in successive layers, in opposite direction, to form the
stranded conductor.
Insulation:
The conductor are insulated with a layer of extruded XLPE compound.
Filling:
The assembled cable is filled with a layer of PVC compound in order to fill the interstices between the cores and render the cable round.
Armoring:
Consists of single layer of galvanized steel wires of appropriate size.
Sheathing:
An outer protection of extruded PVC compound is applied over the armor.
Voltage rating: 0.6/1kV, 3.6/6kV; 6/10KV; 8.7/15KV; 12/20KV; 18/20KV; 19/33KV; 21/35KV; 26/35KV
Operating temperature:
90 continuous normal operation, 130 for emergency overload condition and 250 for short circuit condition
Application:
For outdoor and indoor installations in damp and wet locations, laid direct in the ground where excessive mechanical stresses are present in
sloping and moving terrains and in vertical or inclined laying, as well as in locations susceptible to sliding.
Production range:
Type | Description | Application |
For lying in doors, in tunnels and direct in ground, required to bear certain longitudinal mechanical forces. | ||
YJLV22 | Aluminum conductor XLPE insulated steel tape armored Screened PVC sheathed power cable | |
YJLV23 | Aluminum conductor XLPE insulated steel tape armored Screened PE sheathed power cable | |
For lying in doors, in tunnels and direct in ground and wells, required to bear external mechanical forces and determinate pulling force. | ||
YJLV32 | Aluminum conductor XLPE insulated fine steel wire armored Screened PVC sheath power cable | |
YJLV33 | Aluminum conductor XLPE insulated fine steel wire armored Screened PE sheathed power cable
|
Exhibition:
Certificates
Packaging & Shipping
All cable For exporting are well packed and protected by wooden drum or Wood and Steel Drum.The packing material is depended on the weight and size of cable.The good information, manufacture information, and the client's information is firmly printed on each size of drum.
After the well packed cable drums sent to Sea Port, they are loaded into 20 FT container or 40 FT container. All cable drum are firmly fixed by safety belt to make sure, no movement during the sea freight.
The size of the container is chosed according to weight of total loaded goods or as per the client's requirement.