Submersible pump cable is used for the power cable of ESP units which is installed on land or offshore oil Wells.
Structure: The cables for submersible oil pump or pump unit can be produced with different types and specifications, the cross-section of conductor is 42mm2 and below. The well temperature is from 50ºC to 180ºC, the max. Continuous working temperature of conductor is 204ºC. The insulation material that can be used is as below: PP, EPR, polyimide-F46, fluoroplastics, XLPE, etc. The material of inner jacket includes NBR, compound of the neoprene and PVC, EPR, fluoroplastics, lead, etc. The outer sheath material is as the galvanized steel tape, stainless steel tape, etc.
Conductor -- Solid or stranded tinned copper
Insulation -- EPDM/EPR
Sheath -- EPDM/EPR
Barrier -- Oil resistant or braid tape Layer(Separator)
AWG sizes are approximate equivalent values. The actual cross-section is in mm².
Submersible oil pump power cable is used for submersible oil motor power supply. inculde round and flat, also could be buildup by all the power cable types together with different stainless steel pipe/tube sizes.
Packaging & Shipping
All cable For exporting are well packed and protected by wooden drum or Wood and Steel Drum.The packing material is depended on the weight and size of cable.The good information, manufacture information, and the client's information is firmly printed on each size of drum.
After the well packed cable drums sent to Sea Port, they are loaded into 20 FT container or 40 FT container. All cable drum are firmly fixed by safety belt to make sure, no movement during the sea freight.
The size of the container is chosed according to weight of total loaded goods or as per the client's requirement.