YJV YJV22 YJV32 VV VV22 VV32 PVC/XLPE/Armoured Cable With Low Voltage

1.Applications
-These cables are used for electricity supply in low voltage installation system.
-They are suitable for installation in indoors and outdoors,in cable ducts, underground, in power and switching stations,
local energy distributions, industrial plants, where there is no risk of mechanical damage.



2.Construction


-Conductors
The conductors shall be either of Class 1 or Class 2 of plain  accordance with IEC 60228.

-Insulation
PVC Insulation material and thickness shall be as per IEC 60502-1, PVC material shall be Type A as per IEC 60502-1.

-Assembly / Inner Covering
The inner coverings may be extruded or lapped. 

-Armour
Aluminum/galvanized steel/steel wires applied helically over the Inner Covering as per IEC 60502-1,
 

-Outer Sheath
Outer sheath shall be of extruded PVC  as per IEC 60502-1, Polyethylene, Halogen free compound.
Polychloroprene, chlorosulfonated polyethylene or similar polymers.

-Fire Performance of Cable Sheaths
Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22,
IEC 60332-3-23 and IEC 60332-3-24, Halogen Free material comply to IEC60754-1/2 and IEC 60684-2.

3.Parameters

Single core(unarmoured)
Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation Thickness		Nominal Sheath Thickness	Overall Diameter (Approx.)
mm^2	mm	mm		mm	mm
1x4	2.3	1		1.4	7.1
1x6	2.8	1		1.4	7.6
1x10	3.6	1		1.4	8.4
1x16	4.5	1		1.4	9.3
1x25	5.6	1.2		1.4	10.8
1x35	6.7	1.2		1.4	11.9
1x50	8	1.4		1.4	13.6
1x70	9.4	1.4		1.4	15.1
1x95	11	1.6		1.5	17.2
1x120	12.4	1.6		1.5	18.7
1x150	13.8	1.8		1.6	20.6
1x185	15.3	2		1.7	22.7
1x240	17.5	2.2		1.8	25.4
1x300	19.5	2.4		1.9	28.0
1x400	22.6	2.6		2.0	31.7
1x500	25.2	2.8		2.1	35.0
1x630	28.3	2.8		2.2	38.3

Two cores(unarmoured)
Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation Thickness		Nominal Sheath Thickness	Overall Diameter (Approx.)
mm^2	mm	mm		mm	mm
2x1.5	1.4	0.8		1.8	9.6
2x2.5	1.8	0.8		1.8	10.4
2x4	2.3	1		1.8	12.2
2x6	2.8	1		1.8	13.2
2x10	3.6	1		1.8	14.8
2x16	4.5	1		1.8	16.6
2x25	5.6	1.2		1.8	19.6
2x35	6.7	1.2		1.8	21.8
2x50	8	1.4		1.8	25.2
2x70	9.4	1.4		1.9	28.1
2x95	11	1.6		2.0	32.4
2x120	12.4	1.6		2.1	35.4
2x150	13.8	1.8		2.2	39.2
2x185	15.3	2		2.4	43.3
2x240	17.5	2.2		2.5	48.9
2x300	19.5	2.4		2.7	54.0
2x400	22.6	2.6		2.9	61.5

Three cores(unarmoured)
Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation Thickness		Nominal Sheath Thickness	Overall Diameter (Approx.)
mm^2	mm	mm		mm	mm
3x1.5	1.4	0.8		1.8	10.1
3x2.5	1.8	0.8		1.8	10.9
3x4	2.3	1		1.8	12.9
3x6	2.8	1		1.8	13.9
3x10	3.6	1		1.8	15.7
3x16	4.5	1		1.8	17.6
3x25	5.6	1.2		1.8	20.8
3x35	6.7	1.2		1.8	23.2
3x50	8	1.4		1.8	26.9
3x70	9.4	1.4		1.9	30.1
3x95	11	1.6		2.1	34.7
3x120	12.4	1.6		2.2	38.0
3x150	13.8	1.8		2.3	42.1
3x185	15.3	2		2.5	46.5
3x240	17.5	2.2		2.7	52.5
3x300	19.5	2.4		2.8	58.0
3x400	22.6	2.6		3.1	66.1

Three cores+1(unarmoured)
Nominal Cross Section	Diameter of Conductor (Approx.)		Nominal Insulation Thickness			Nominal Sheath Thickness	Overall Diameter (Approx.)
mm^2	(3)mm	(1)mm	(3)mm		(1)mm	mm	mm
3x 16/10	4.5	3.6	1		1	1.8	19.0
3x 25/16	5.6	4.5	1.2		1	1.8	22.6
3x 35/16	6.7	4.5	1.2		1	1.8	25.3
3x 50/25	8.0	5.6	1.4		1.2	1.9	29.6
3x 70/35	9.4	6.7	1.4		1.2	2.0	33.2
3x 95/50	11.0	8.0	1.6		1.4	2.2	38.4
3x120/70	12.4	9.4	1.6		1.4	2.3	42.0
3x150/70	13.8	9.4	1.8		1.4	2.5	46.6
3x185/95	15.3	11.0	2		1.6	2.6	51.6
3x240/120	17.5	12.4	2.2		1.6	2.9	58.3
3x300/150	19.5	13.8	2.4		1.8	3.1	64.5
3x400/185	22.6	15.3	2.6		2	3.3	73

Four cores(unarmored)
Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation Thickness		Nominal Sheath Thickness	Overall Diameter (Approx.)
mm^2	mm	mm		mm	mm
4x1.5	1.4	0.8		1.8	10.8
4x2.5	1.8	0.8		1.8	11.8
4x4	2.3	1		1.8	14.0
4x6	2.8	1		1.8	15.2
4x10	3.6	1		1.8	17.1
4x16	4.5	1		1.8	19.3
4x25	5.6	1.2		1.8	22.9
4x35	6.7	1.2		1.8	25.6
4x50	8	1.4		1.9	29.9
4x70	9.4	1.4		2.0	33.5
4x95	11	1.6		2.2	38.7
4x120	12.4	1.6		2.3	42.3
4x150	13.8	1.8		2.5	46.9
4x185	15.3	2		2.6	51.9
4x240	17.5	2.2		2.9	58.6
4x300	19.5	2.4		3.1	64.8
4x400	22.6	2.6		3.3	73.8

Multi-cores(unarmoured)
Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation Thickness		Nominal Sheath Thickness	Overall Diameter (Approx.)
mm^2	mm	mm		mm	mm
5x1.5	1.4	0.8		1.8	11.7
7x1.5	1.4	0.8		1.8	12.6
10x1.5	1.4	0.8		1.8	15.6
12x1.5	1.4	0.8		1.8	16.1
14x1.5	1.4	0.8		1.8	16.8
19x1.5	1.4	0.8		1.8	18.6
21x1.5	1.4	0.8		1.8	19.5
24x1.5	1.4	0.8		1.8	21.6
30x1.5	1.4	0.8		1.8	22.8
40x1.5	1.4	0.8		1.8	27.7
48x1.5	1.4	0.8		1.9	28.2
61x1.5	1.4	0.8		1.9	30.9
5x2.5	1.8	0.8		1.8	12.8
7x2.5	1.8	0.8		1.8	13.8
10x2.5	1.8	0.8		1.8	17.2
12x2.5	1.8	0.8		1.8	17.7
14x2.5	1.8	0.8		1.8	18.6
19x2.5	1.8	0.8		1.8	20.6
21x2.5	1.8	0.8		1.8	21.6
24x2.5	1.8	0.8		1.8	24.0
30x2.5	1.8	0.8		1.8	25.4
40x2.5	1.8	0.8		2.0	31.1
48x2.5	1.8	0.8		2.0	31.7
61x2.5	1.8	0.8		2.1	34.7

4.Contact us

If you need low voltage cable, medium voltage cable, control cable, rubber cable,
ABC cable, ACSR, underground cable, armoured cable, XLPE cable, PVC cable,