Low To High Eletrical Voltage XLPE Power Cables 26kv 35kv 66kv 69kv 110kv 132kv 220kv 275kv 330kv
Conductor: Circular stranded copper conductor, conforms to IEC 60228 class 2
Inner Covering: PVC
Armour: Galvanized Steel Wire or tape
Sheath: PVC type ST2 to IEC 60502, black
Note: Insulation color as per standards or customer requirement
Low to high eletrical voltage XLPE power cables 26kv 35kv 66kv 69kv 110kv 132KV 220KV 275KV 330KV
High-voltage 110~220KV XLPE Cable
Brief introduction of the 110~220KV XLPE high-voltage cable products
1. The cross-linkage PE insulated and wrinkled aluminum wrapper waterproof PVC sheathed power cable.
2. The cross-linkage PE insulated and wrinkled aluminum wrapper waterproof PE sheathed power cable.
Specific property for usage of 110KV~220KV XLPE high-voltage cable 1. Cable's conductor highest working temperature is allowed up to 90º C, and overload when meet an emergency is 130º C, When short circuit (in ≤ 5 seconds) the highest temperature is 250º C 2. When installing or laying cable, the ambient temperature should be less than -20º C, and have to give a preheat to cable. 3. The minimum bending diameter(in follow the table): Note: In form, D0 is a real test value to cable's outer diameter. 4. Allowed biggest axial traction force to outer diameter when laying cable (not consider the radial lateral-pressure at bent set ion) T=K× Core NO. × Section (kg), in formula, the coefficient K value should be: The copper core get 7, the aluminum core get 4. 5. Allowed biggest lateral-press P, when cable is being bent The single core cable is required P≤ 500kg/m. P=T/R (T is indicated axial traction force; R is indicated radius of bent-wheel), Knowing from above formula, as the traction force is made up by length and weight of cable. So it lets P to applying requirement as above. Then the diameter of bent-wheel should be widened. 6. Cable laying is not being restricted by drop.
240mm 2 ~ 3000mm 2
Suitable for the places with a higher underground water level and to be used underground, in the tunnels or pipes. Such cables bear a bigger pulling force and pressure.
Cable type Bending diameter
Packaging & Shipping
All cable For exporting are well packed and protected by wooden drum or Wood and Steel Drum.The packing material is depended on the weight and size of cable.The good information, manufacture information, and the client's information is firmly printed on each size of drum.
After the well packed cable drums sent to Sea Port, they are loaded into 20 FT container or 40 FT container. All cable drum are firmly fixed by safety belt to make sure, no movement during the sea freight.
The size of the container is chosed according to weight of total loaded goods or as per the client's requirement.
DHL, UPS,FEDEX, TNT, or designated forwarder.
T/T, Western Union, or PayPal
Prepay with goods payment or pay by collected.
Packed in bulk or as request
49*33*23.5cm, 33*30*15cm, 30*30*18cm
Hot Sale HV Submarine Power Cable 33KV 35mm 70mm 95mm 240mm