Underground Power Cables
Conductor: Usually, 1 or 3 conductors (depending upon the application) are used. These conductors are stranded to reduce skin effect, proximity effect and to keep it flexible. Conductors are made from electrolytic grade pure copper or aluminium.
Conductor screen: It is a semi-conducting tape or an extruded layer of a semi-conductive compound. Conductor screening is generally used in MV and HV cables to maintain uniform electric field and minimise electrostatic stresses.
Insulation: It is provided to withstand the electrostatic stress. Various types (and thickness) of insulators like VIR (Vulcanized India Rubber), Impregnated paper, PVC (polyvinyl chloride) and XLPE (Cross linked polyethylene) are utilised depending upon the applied voltage.
Insulation screen: A layer of semi-conductive material generally used in MV and HV lines. It serves the similar purpose as that of conductor screen.
Metallic Sheath: It provides protection to the cable from moisture and other chemicals (acids or alkalies) present in the environment or soil. It’s usually made up of Aluminium or Lead. It also provides a path for fault and leakage currents as the sheath is earthed at one cable end.
Bedding: It is a low grade insulator like Jute or Hessian which protects the metallic sheath from corrosion and from mechanical injury due to armouring.
Armouring: It provides mechanical protection from various stresses the cable may get exposed to during its installation and operational life. It’s usually a steel tape wound around the Bedding layer.
Serving: Another layer of low grade insulator like Jute or Hessian or a thermoplastic compound like PVC is again provided to protect the steel from atmospheric contaminants and agents.
Underground cables are usually classified according to their Voltage ratings. They’re grouped as follows:
Low tension cables which have a maximum voltage handling capacity of 1000V
High tension cables which have a maximum voltage handling capacity of 11kV
Super tension cables which have a maximum voltage handling capacity of 33kV
Extra high tension cables which have a maximum voltage handling capacity of 66kV
Extra super voltage cables which are used for applications with voltage requirement above 132kV.
1. Belted cables: As the name suggests, it has an additional layer of oil-impregnated paper which is wound around the insulated conductors. Such an arrangement is useful for low and medium voltage levels up to 11 kV.
3. Pressure cables: These are used when the voltage requirement exceeds 66kV and solid cables can't be used. Either pressurized gas or pressurized oil is used in these cables.
The applications of Underground Cables include:
Electrical power is transmitted and distributed through these cables.
They are used in places where laying overhead cables becomes impossible.